13 1-800-526-2324 ? www.us.tdk-lambda.com/lp/ ph-s series features u high density u wide range input u output adjustment capability u remote on/off u fixed switching frequency u international safety approvals u low component count simple function, 50 to 600w dc-dc converters note: see installation manual for full details, test methods of parameters and application notes model 3.3v 5v 12v 15v 24v 28v 48v input range vdc 24v nom: 18-36, 48v nom: 36-76v, 110v nom: 82-185v, 280v nom: 200-400v output voltage adj. range vdc 2.97~3.63 4.5~5.5 10.8~13.2 13.5~16.5 21.6~26.4 25.2~30.8 43.2~52.8 line regulation - 0.4% or 20mv (whichever is greater) over entire input range with constant load load regulation - 0.8% or 40mv (whichever is greater) from no load to full load with constant input line ripple and noise pk-pk 100mv 150mv 240mv 280mv 480mv series operation - possible - refer to installation manual over voltage protection - 150 - 180% 125 - 145% overload protection - approximately 105 - 140%, automatic recovery remote on/off - low = on, open = off remote sensing - ph100s, ph150s, ph300s, ph600s models parallel operation - ph300s & ph600s only: requires external circuitry inverter good signal - ph300s & ph600s only: signal available for status of inverter thermal protection - internal sensing, self resetting cooling - conduction or forced air. see application notes for cooling and heatsink selection operating temperature range - baseplate temperature -20c to +85c (100c on ph300 & ph600). - -40c start up possible - consult factory storage temperature - -40c to +85c (+100c on ph300 & ph600) temperature coef? cient - 0.02%/c isolation - input to output: 3000vac, input to baseplate: 2500vac(1) isolation resistance - output to baseplate -100mohm at 500vdc and 70%rh safety agency approval - ul60950-1, csa60950-1, en60950-1 and ce mark. warranty - two years speci? cations key market segments & applications
14 1-800-526-2324 ? www.us.tdk-lambda.com/lp/ revision b1: dec 2011 ph-s series for additional information, please visit us.tdk-lambda.com/lp/products/ph-series-sf.htm ph full function 50 - 300w, full function versions of ph paq, pah, paf 50 - 700w quarter, half & full brick s px 10-40w, 12-48v input, dc-dc cc-e 1.5-30w, 5-48v input, dc-dc other dc-dc products pin description function -vin negative input terminal +vin positive input terminal +s positive remote sense -s negative remote sense +v positive output terminal -v negative output terminal iog inverter good signal trim output adjustment trim pin cnt on/off control terminal cs current monitor signal pinout nominal output output output voltage (v) current (a) power (w) 24v input 48v input 110v input 280v input 3.3 10.0 33.0 - ph50s48-3.3 - ph50s280-3.3 3.3 15.0 49.5 - ph75s48-3.3 - ph75s280-3.3 3.3 20.0 66.0 - ph100s48-3.3 - ph100s280-3.3 3.3 30.0 99.0 - ph150s48-3.3 - ph150s280-3.3 3.3 50.0 165.0 - - - ph300s280-3.3 3.3 100.0 330.0 - - - ph600s280-3.3 5.0 10.0 50.0 ph50s24-5 ph50s48-5 ph50s110-5 ph50s280-5 5.0 15.0 75.0 - ph75s48-5 ph75s110-5 ph75s280-5 5.0 20.0 100.0 - ph100s48-5 - ph100s280-5 5.0 30.0 150.0 - ph150s48-5 ph150s110-5 ph150s280-5 5.0 50.0 250.0 - - - ph300s280-5 5.0 100.0 500.0 - - - ph600s280-5 12.0 4.2 50.0 ph50s24-12 ph50s48-12 ph50s110-12 ph50s280-12 12.0 6.3 75.0 - ph75s48-12 ph75s110-12 ph75s280-12 12.0 8.4 100.0 - ph100s48-12 - ph100s280-12 12.0 12.5 150.0 - ph150s48-12 ph150s110-12 ph150s280-12 12.0 25.0 300.0 - - - ph300s280-12 12.0 50.0 600.0 - - - ph600s280-12 15.0 3.4 50.0 ph50s24-15 ph50s48-15 ph50s110-15 ph50s280-15 15.0 5.0 75.0 - ph75s48-15 ph75110-15 ph75s280-15 15.0 6.7 100.0 - ph100s48-15 - ph100s280-15 15.0 10.0 150.0 - ph150s48-15 ph150s110-15 ph150s280-15 15.0 20.0 300.0 - - - ph300s280-15 15.0 40.0 600.0 - - - ph600s280-15 24.0 2.1 50.0 ph50s24-24 ph50s48-24 ph50s110-24 ph50s280-24 24.0 3.2 75.0 - ph75s48-24 PH75S110-24 ph75s280-24 24.0 4.2 100.0 - ph100s48-24 - ph100s280-24 24.0 6.3 150.0 - ph150s48-24 ph150s110-24 ph150s280-24 24.0 12.5 300.0 - - - ph300s280-24 24.0 25.0 600.0 - - - ph600s280-24 28.0 1.8 50.0 ph50s24-28 ph50s48-28 ph50s110-28 ph50s280-28 28.0 2.7 75.0 - ph75s48-28 ph75s110-28 ph75s280-28 28.0 3.6 100.0 - ph100s48-28 - ph100s280-28 28.0 5.4 150.0 - ph150s48-28 ph150s110-28 ph150s280-28 28.0 10.8 302.0 - - - ph300s280-28 28.0 21.5 602.0 - - - ph600s280-28 48.0 6.3 302.0 - - - ph300s280-48 48.0 12.5 600.0 - - - ph600s280-48 model selector
|